Friday, July 8, 2011

A Faster Way To Shut Down And Log Off Your Windows XP


If you’re experiencing slow shutdowns and log offs on your Windows XP, this trick will help you.
Instead of accessing the shutdown menu via Start->Turn Off Computer, open the Task Manager by pressing Ctrl+Alt+Delete.
Press “Shut Down” at the top of the Task Manager and choose what you want your Windows XP to do:
  • Stand By
  • Hibernate
  • Turn Off
  • Restart
  • Log off
  • Switch User
The task will be performed in a matter of seconds.

Thursday, July 7, 2011

Boost Windows Xp Speed Upto 60%


Whenever you start your computer, you are faced with a few moments of thumb twiddling while Windows XP boots and prompts you to log on. Although you should expect to wait for a few moments, sometimes Windows XP seems to boot rather slowly. In fact, you may notice that over a period of time the PC that used to roar to life seems a bit sluggish instead. Fortunately, you can perform several techniques that help Windows XP get the bootup speed you want. This chapter explores how to put these techniques to work.

Some of the things may already have been discussed in some threads earlier


Stopping Unneeded Startup Services

Along with the core operating system and programs that Windows XP runs when it starts, there is also a host of services involved. Many of these services are necessary for Windows XP to operate correctly. However, many of them are for features in Windows XP that you may not use at all. You can peruse the services and disable any service that you do not want to run. The fewer services that run, the more quickly Windows XP will boot.

Caution: Exercise caution when stopping services. If you do not know what a service does or are unsure of the ramifications of stopping the service, leave it alone. Some services are critical to Windows XP's operations, so make sure you understand what the service is before you disable it.

To reduce the number of services that start on bootup, you can access two different areas of Windows XP. The first is the System Configuration Utility. The Services tab shows you the services that start when the computer boots.

You can stop a service from starting by simply clearing the check box next to the service and clicking OK. However, before you do so, there is another way to disable services that you may prefer because the interface gives you more information about the service in question.

Open Control Panel/Administrative ToolsServices or else select Start/Run, type services.msc, and click OK. Either way, you see the Services console.

I prefer to use the Services console instead of the System Configuration Utility because it describes what the service does. Additionally, you can double-click a service and examine its properties.

Notice the Startup Type column in Figure 4-2. This information lists whether the service is automatic or manual. Manual services are only started in Windows XP when you start a process that requires the service. Some other process may require the service that has a "dependency" relationship with it; in this case, the dependency service will start, as well. Because these services do not start automatically when you boot Windows XP, you do not need to do anything with manual services.

However, all services listed as automatic start when Windows XP boots. These are the services that increase boot time. As I have mentioned, many of them are necessary and important, so you should not stop automatic services from booting unless you are sure of the ramifications. You can get this information by looking at the Description column. Here's a quick look at common services you may want to live without:

Automatic Updates: This service enables Windows XP to check the Web automatically for updates. If you don't want to use
Automatic Updates, you can disable the service. You can always check for updates manually at the Windows Update Web site.
Computer Browser: If your computer is not on a network, you don't need this service. If you are on a network, leave it alone.
DHCP Client: If you are not on a network, you do not need this service. If you are on a small workgroup, you can still increase boot time by configuring manual IP addresses (which I explore later in this chapter).
  
DNS Client: If you are not on a network, you do not need this service. If you are, leave it alone.

Error Reporting and Event Log: You don't have to use these services but they can be very helpful, so I would leave them configured as automatic.

Fax: If you don't use your computer for fax services, you can disable this one. Help and Support: If you never use the Windows XP

Help and Support Center (found on the Start menu), you can disable this service.

IMAPI CD-Burning COM: This service enables you to burn CDs on your computer. If you never burn CDs, you can disable the service.

Indexing Service: Your computer keeps an index of files but if you rarely search for files, the service is just a resource hog. You can stop it and turn the service to manual.

Windows Firewall/Internet Connection Sharing: If you do not use these features, you can disable them.

Infrared Monitor: If you do not use infrared devices, you can disable this service.

Messenger: This service sends alert messages on a local area network (it is not the same as Windows Messenger). If you are not on a network, you can disable this service.

Print Spooler: If you do not do any printing from the computer, you can disable this service. If you print, make sure you leave it as automatic.

Remote Registry: This service allows remote users to modify the Registry on your computer. If you are not on a network, you can disable this service.

System Restore Service: This service allows you to use System Restore. If you have turned off System Restore anyway, you do not need to turn off the service. If you do, you turn off System Restore.

Themes: If you do not use themes, you can disable this service.

Windows Image Acquisition: If you do not use scanners or digital cameras, you can disable this service.

Wireless Zero Configuration: If do not use wireless networking devices, you can disable this service.
You may have a number of other automatic services, depending on software and other configurations on your computer. So it's a good idea to look through the services and learn more about them. If you double-click a service, a Properties dialog box appears

Notice that on the General tab, you see a Startup Type drop-down menu. If you want to change an automatic service to manual, select Manual here and click OK. As a general rule, don't disable a service unless you are sure you will never use it.
  

However, manual configuration allows the service to be started when you find it necessary, thus speeding up your boot time. However, before you change a service to manual, look at the Dependencies tab (see Figure 4-4). This tab shows you which other services depend upon the service you are considering changing.

Keep in mind that services are necessary for the vast functionality you get with Windows XP. Change only those services that you understand and do not use. How you use your Windows XP computer should be the best guide in terms of optional startup services.

Tips:
The Indexing service and the System Restore service take up a lot of disk space and system resources across the board.
You can live without the Indexing service but I suggest that you keep using System Restore. It works great when you are in a bind and this is one case where the loss of speed may not be worth the ramifications of not using System Restore. Speed Tips and Tricks for Windows XP Startup Aside from startup programs, services, and the Prefetch folder, there are a number of other startup procedures and issues you can modify to help Windows XP start faster. The following sections explore those tips and tricks. Manual IP Addressing on Small Office/Home Networks Windows XP is configured to help you take care of networking. It uses the TCP/IP protocol for networking in workgroups, or what you might call small office or home networks that do not use a dedicated server. The problem is that automatic IP addressing can be slow. When your computer boots, it has to query the network to see what IP addresses are already in use and then assign itself one. If you want to speed up the boot time a bit, consider manually assigning IP addresses to all computers on the network. This way, the network computers do not have to worry about locating an automatic IP address. Because one is manually configured, the operating system doesn't have to spend time solving this problem. This isn't a networking book, however, so I won't delve into the implications of using a manual IP address, but if you are using a computer that functions as a host computer to the Internet (using Internet Connection Sharing [ICS]), you can get into connectivity problems if you change the configuration of the IP address. However, you can still work around this problem by starting with the ICS host computer. Select Start/Connect To/Show All Connections. Right-click your network adapter card and click Properties. On the General tab, select TCP/IP in the list of services and click the Properties button. In the TCP/IP properties, you can see if you use an automatic or manual IP address. In the example in Figure 4-5, I have configured a manual IP address of 90.0.0.1 and a default subnet mask. The other computers on my office network each use a different IP address in the same class, such as 90.0.0.2, 90.0.0.3, 90.0.0.4, and so on. This way, each computer has a permanent IP address, which helps increase boot time. Note that if you change the IP addresses of your computers, they must all use the same subnet mask. A default subject mask of 255.255.255.0 will keep you in good shape. Make sure you understand the implications of changing IP addresses on your network. If you have no networking experience at all, you may be wiser to leave the automatic IP addressing as is and try to gain some speed using the additional suggestions in this chapter. Disabling Recent Documents History Windows XP includes a feature that keeps track of all recent documents you have opened or used. The idea is that you can select Start/Recent Documents History and quickly reopen any document you have recently used. I use many documents each day and never use the feature myself. In my opinion, I can keep up with what I want to use without Windows XP doing it for me. The bad thing about Recent Documents History is that Windows XP has to calculate what should be put there each time you boot Windows, which can slow things down. So, if you never use the Recent Documents History, it's a good idea to disable it.

Here's how:
1. Open the Registry Editor (select Start/Run, type regedit, and click OK).
2. Navigate to HKEY_CURRENT_USER\Software\Mcft\Windows\ CurrentVersion\Policies\Explorer.
3. Create a NoRecentDocsHistory D_WORD key. Double-click the value to open it once it is created.
4. Set the Data Value to 1 to enable the restriction.
5. Click OK and close the Registry Editor. You'll need to restart the computer for the change to take effect. Disabling the Boot Logo You can remove the boot logo that appears when you start Windows XP. This little tweak probably shaves only a few seconds off your boot time but seconds count if you are serious about trying to get Windows XP up and running as quickly as possible. The only negative is that if you remove the boot logo, you will also not see any boot messages, such as check disk. (But if you are not having problems with your computer, this isn't such a big deal.)
To remove the boot logo, follow these steps:
1. Select Start/Run, type msconfig, and click OK.
2. In the System Configuration Utility, click the BOOT.INI tab.
3. On the BOOT.INI tab, click the NOGUIBOOT check box option. Click OK. Removing Unwanted Fonts One trick that increases your boot time a bit is to lose any fonts in the Fonts folder in Control Panel that you never use. The more fonts you have, the more processing Windows XP has to do to prep all of those fonts for use. You must be a bit careful here to not remove fonts that you might want, but there is a good chance that you can live without many of them. For instance, you may have foreign language fonts and other symbol fonts (such as Wingdings) that you never use. To delete unneeded fonts, follow these steps:
1. Open the Fonts folder in Control Panel.
2. Select Edit/Select All and then Edit/Copy.
3. Create a new folder on your desktop, open it, and select Edit/Paste.
4. In this new folder, delete any of the fonts you do not want.
5. Return to the Fonts folder in Control Panel. Right-click the selected fonts and click Delete.
6. Go back to your new desktop folder and click Edit/Select All.
7. Return to your Fonts folder and click Edit/Paste. You now have only the desired fonts in the Fonts folder. Tip: You can directly delete fonts from the Fonts folder without creating the secondary folder. However, I recommend the preceding steps to help ensure that you do not make a mistake in the deletion process. Stopping Remote Assistance and Remote Desktop Sharing In Windows XP Professional, you have two remote networking features called Remote Assistance and Remote Desktop Sharing. These remote networking features are very helpful in a variety of situations but if you don't use them, it is good idea to disable them to save boot time. You can always enable them later if you want to use them. Note: If you are interested in using Remote Desktop or Remote Assistance, see my book Windows XP for Power Users: Power Pack published by John Wiley & Sons.
1. Open the Start menu, right-click My Computer, and choose Properties.
2. Click the Remote Tab.
3. Clear both check boxes to disable Remote Assistance and Remote Desktop. Speeding Up the Dual-Boot Timeout If you dual-boot your computer with Windows XP and another operating system, you see an operating system selection menu on startup. If you typically boot into Windows XP and not the other operating system, you can speed up the dual-boot timeout value so that you do not wait so long for the boot process to select your default operating system and continue with the boot process. The default timeout value is 30 seconds but you can change this setting to 10. This gives you enough time to select the alternate operating system if you want but also speeds up the boot process. You can skip this section if you do not use a dual-boot configuration.
Follow these steps:
1. Locate the boot.ini file on your computer. It is a hidden file by default; mine is located in C:\boot.ini.
2. Open the file with Notepad (which is what opens it by default).
3. Change the Timeout value to 10 (see Figure 4-11).
4. Select File/Save and close Notepad. Speeding Up Your PPPoE Connection If you use a Point-to-Point Protocol connection over Ethernet (PPPoE), you may notice a delay in using the PPPoE connection after startup. By default, there is a 120 second delay but you can stop this behavior by manually configuring an IP address for the network adapter card. If you do not use a PPPoE connection, you can skip this section.
1. Select Start/Connect to/Show All Connections.
2. Open the TCP/IP properties for your LAN network interface card.
3. Manually set the IP address on the TCP/IP properties to an appropriate IP address and subnet mask for your network. Reducing the Wait Time When you start to shut down Windows XP, it has to quit, or "kill," any live applications or processes that are currently running. So close all applications first. However, some applications and processes are always running in the background. You can reduce the amount of time that Windows XP waits for those applications and processes to close before Windows XP kills them. Edit three different Registry settings to change this:
1. Open the Registry Editor.
2. Navigate to HKEY_CURRENT_USER\Control Panel\Desktop. Select WaitToKillAppTimeout and set the value to 1000.
3. Select the HungAppTimeout value and set it to 1000 as well. 4
. Navigate to HKEY_USERS\.DEFAULT\Control Panel\Desktop. Set the WaitToKillAppTimeout and set the value to 1000. Select the HungAppTimeout \newline value and set it to 1000 as well.
5. Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l. Select the WaitToKillServiceTimeout value and set it to 1000.
6. Close the Registry Editor. Automatically Killing Tasks on Shutdown You know the drill. You start to shut down the computer, you wait a few moments, and then you see a dialog box asking if you want to kill an application or service that is running. Instead of prompting you, you can make Windows XP take care of the kill task automatically. Here's how:
1. Open the Registry Editor.
2. Navigate to HKEY_CURRENT_USER\Control Panel\Desktop.
3. Highlight the value AutoEndTasks and change the value to 1.
4. Close the Registry Editor.

Friday, May 6, 2011

Top 10 Google Chrome Plugins



In an extensive multimedia network like the web, Google Chrome plugins aid in connecting all diverse features and bring a better browsing environment for the computer user. These add-ons support different Internet applications in an entire operational system. These extensions known as plugins that create network shortcuts are more than three thousand for this browser.
 
AdBlock
The first group of the top 10 Google Chrome plugins helps with the browsing experience. One needs to first download the Google Chrome before activating its various options. One of these is the feature that allows e-commerce marketers to upload advertisements directly to a computer user.
Tab Extension
By selecting this extension, the browser is able to make do with double sites within a single tab. This means that they can be able to have a window full of opened sites other than the limited ones that can be opened with other software.
Social Media Plugin
This is a custom tool that enables one to share content across the networking media such that they can have their inbox pages displayed on their desktops instead of going to the homepage.
Bookmark Add-on
Fourthly, the browsing capability afforded by Google Chrome plugins can be seen in the ability to bookmark different media content that one comes across on the Internet. These can be sent across the platform in their live form to others on the web.
Blog Extension
There is also the extension that is worthwhile for owners of small sites who can be able to generate content easily through automated assistance.  It comes with options for generating keyword suggestions.

Chrome Plugins
Install A Dictionary
Chrome plugins on the other hand apply more to the desktop applications of the web by creating shortcuts for easier browsing in local mode. This means that one can be able to perform certain tasks such as reading dictionaries without going to a website offering this vocabulary device.
YouTube Add-on
The second of the top capabilities afforded through this operational system help is that of installing multimedia on the desktop in compatibility with the OS. This means that one can download video content directly to their players that they have set up for the purpose without relying on the live online site.
Translator
This important tool among the Chrome plugins for the operational system helps to decode content that is availed from different platforms.
It comes with the left clicking choice for translating content while the right hand tab allows the user to widen their translation selections while also affording them the deactivation feature.
ChromePass
There is also the ChromePass that helps to remember the account details of the users including those of initializing their computers and for accessing their emails.  The latter is offered by the mailing icon that affords one to send and receive messages without necessarily having to go to their mail providers.
Thus, the above Google Chrome plugins help to make sure that all the network features either for browsing or for performing communication tasks are within the grasp of the computer user. They act as essential shortcuts to various web applications that can be installed on the desktop.

Monday, May 2, 2011

Folder Options Missing



Many of us sometimes find the folder options missing in windows explorer.
Here's the solution-->

Open Run and then type "gpedit.msc".
Now goto User Configuration > Administrative templates > Windows Component > Windows Explorer.

Click on Windows Explorer you will find the 3rd option on the right side of screen "Removes the Folder Option menu item from the Tools menu"
Just check it, if it is not configured then change it to enable by double clicking on it and after applying again set it to not configured.

Thursday, February 24, 2011

Make Ur Illegal Windows XP Legal

1) ) Go to Start, Run, type regedit
2) Browse to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WPAEvents
3) In the right-hand pane, double click on the value "OOBETimer"
4) Change one of these characters to another random character (it really doesn't matter which, the idea is to corrupt the key so that we un-activate our copy of Windows) and press OK

[Image: je1nTM.JPG]

5) I've generated keys for you so use one of the following:

HFRJP-BVYWW-C8C63-F36MJ-GMDQD
KD2YT-4YT3T-4VQQX-43WBV-FDF3M
CX633-TT3DV-VQP3F-94DKT-3MRR3
W6GHC-TXPFC-V79P2-BCHDQ-DJV3W
J3TGH-CPY32-CCXCW-C6FQF-DFBHB
F2GW6-TMPJT-VH2GF-9G3XM-G9GYD
J9QWM-JP8BX-M9C2F-JJXYH-WTD7B
K4YHK-GQRXD-7T773-YGYYJ-68JBJ
G96J2-2WYMR-9BFMP-MQRJT-XCXV6
CT7TY-2VTY4-PMPGF-2PQFH-Q8HPT
QX2V4-2V76D-XH8PV-RQQT9-QJMBT
PX83Q-RXY8T-TRXQM-CDHFB-78BGG
PDCV3-3V282-DXMVJ-V6HGJ-P9JHQ
JMRCY-4QMYM-J3BVJ-BQJWF-2HTKJ
BRYJV-CFWKX-JYDM9-RDW34-PRV46
KKH9W-PR2XY-XFYXW-R4C2R-XFXJ3
W4DTB-P33VR-G26PF-4BW39-WP2Q3
KMT4R-W6RPC-CQJX3-YDM9C-BV24Y
PCM2H-JPK8V-TCTBM-3KFB2-33488
CXRYY-TM77D-92JJX-44DX8-8RW9M
D62H3-XTG8F-2RMTX-KG938-9RYCJ
R2TJC-YTHTC-B7GVQ-RJ6W8-GT9KW
HJHYP-P7Q6B-D6HP9-2WPT2-3BFPQ
FKK2C-6R3DR-M6PFW-4KYTT-PDWFT
TRYD9-P4CQB-6M3D6-V38JW-VX6RQ
VP78X-YYK8K-3JJ68-88JBR-G3RV6
VQHHH-M9GJF-JKRVX-DCQVC-MFR8G
HYYP3-TRB3T-QKCH2-VCMGG-FHFPJ
JHR24-6R3BT-6TV28-KR7KM-JRXBB
P9XGQ-P28TT-X92FQ-TKKKJ-YYG8D
KR984-244TH-2H362-DFM7V-GDJ7G
Q7G9T-HWPXX-444W4-JD66G-27F2Y
G342Y-CKTW3-4VKBR-CW8XP-H6C3M
BPQMQ-RVJQT-WPCGR-P724W-GR2DQ
V2QPR-D4YMK-BRCT3-3D8M2-DM238
TC2KV-93BGP-7D8TK-T7FB7-6VKVM
PTQYY-YQT3V-GQXW2-7Y8TP-V4B8G
VC3XJ-TR9VY-J3RW3-RHFQB-7WVH3
JF2PQ-TT973-V9FGQ-KCBTF-2YBJD
JK6XC-4K7JR-69MMM-T98HR-JTRF8
BY46T-9KBKT-RBKHY-V6YP9-GKVQJ
KXGVX-2R9QB-CG83F-GMCDK-DMTVD
T6K2F-VH9HH-4W9WY-7JX99-CCHYB
TVPWG-KKPM8-FRWGM-JD7C4-TQ9JW
RCDFP-CXP4T-YYYXJ-PJ72W-W2B73
HTDVM-2J9JF-7FB8T-WRCBX-DXX8D
WWCM4-V6RTV-38QHF-BF72G-DR98B
K7RDG-MYR34-WRBG7-237YV-RX8D6
JF33Y-323QW-QWPF6-9DTVQ-JTR8Q
TPKJY-2XBTC-GH87P-62886-Q69RD

6) Go to Start, Run, and type C:\windows\system32\oobe\msoobe.exe /a, obviouslly replace C: with the drive letter that Windows is installed to.
7) Select the option to activate by phone, and press Next
Cool Click the button at the bottom labelled "Change Product Key"
9) Enter the new product key that the keygen created, and click Update
10) When the key is updated, do not continue with the activation process, close the activation window!

There are 50 unique keys and let me know if any don't work. There's about a 99% success rate with these keys so there may be one that doesn't work. Try another.

Saturday, January 8, 2011

Make Your Folder Private


•Open My Computer
•Double-click the drive where Windows is installed (usually drive (C:), unless you have more than one drive on your computer).
•If the contents of the drive are hidden, under System Tasks, click Show the contents of this drive.
•Double-click the Documents and Settings folder.
•Double-click your user folder.
•Right-click any folder in your user profile, and then click Properties.
•On the Sharing tab, select the Make this folder private so that only I have access to it check box.

Note
•This option is only available for folders included in your user profile. Folders in your user profile include My Documents and its subfolders, Desktop, Start Menu, Cookies, and Favorites. If you do not make these folders private, they are available to everyone who uses your computer.
•When you make a folder private, all of its subfolders are private as well. For example, when you make My Documents private, you also make My Music and My Pictures private. When you share a folder, you also share all of its subfolders unless you make them private.
•You cannot make your folders private if your drive is not formatted as NTFS.

Create a password reset disk


If you’re running Windows XP Professional as a local user in a workgroup environment, you can create a password reset disk to log onto your computer when you forget your password. To create the disk:
1.Click Start, click Control Panel, and then click User Accounts.
2.Click your account name.
3.Under Related Tasks, click Prevent a forgotten password.
4.Follow the directions in the Forgotten Password Wizard to create a password reset disk.
5.Store the disk in a secure location, because anyone using it can access your local user account.

Change Windows Default Identity


In windows XP, you can change the windows default identity (Computer Manufacturer Logo and other information’s) and share your own private identity there. First you right click on My Computer then click on Properties, here may be you will see computer manufacture logo or empty area. So add your own logo there to make your computer more private.Follow the given steps to change the system default Properties identity:
First click on Start button and type notepad in Run option then press Enter.Now type the following text in notepad.
[General]Manufacturer=”Haseeb Haider Memon”Model=” Computer Tips and Tricks!”[Support Information]Line1=”Free Computer Tips And Tricks by HASEEBHM”Line2=”pctipsntricks.wordpress.com”
There are some standard keywords, for example Manufacturer, Model, Line 1, Line 2; you can not change these keywords. Now save this notepad file in c:/windows/system32 folder with file name, OEMINFO.INI.
Now choose your favorite picture to set as logo, using any picture editor resize the picture size approx. 150X150 pixels then save it in c:/windows/system32 folder with file nameOEMLOGO.BMP. 
Now close the all files and restart your computer after any changes to go into effect. To verify these changes, right click on My Computer and open Properties.  system-info.jpg

Thursday, December 30, 2010

Call Me for LIC 9236542531

      

LIC AGENT BARABANKI (SATYAM SRIVASTAVA) MOB-09236542531, 09369361050

LIC AGENT BARABANKI (SATYAM SRIVASTAVA) MOB-09236542531, 09369361050

Apna aur apne parivar kajeevan surakshit banane k liye mujhse sampark kare..
LIC agent
SATYAM SRIVASTAVA (Barabanki)
Mobile - 09236542531


अपना और अपने परिवार का जीवन सुरक्षित बनाने के लिए मुझसे संपर्क करें
एल० आई० सी० एजेंट (बाराबंकी)
सत्यम श्रीवास्तव


मोबाइल  - 09236542531